The Importance of a Radiant Barrier
When Installing a Radiant Heat System
If you have a radiant heat system, radiant barrier foil is an ideal way to maximize your
radiant heat efficiency.
Radiant heat is heat that is transmitted from a heat source through space and a radiant
barrier is designed to reflect that heat towards your living space.
Radiant barriers are made from materials that are poor at absorbing heat but excellent at
reflecting it. A radiant barrier is usually a thin sheet or coating of a highly reflective
material, mostly aluminum. An effective radiant barrier must reflect 97% of the heat and in
order to perform correctly, the reflective side must be open to an air space.
By using radiant barrier foil you can substantial increase your energy savings especially
since this foil barrier can reflect so much heat back to its source. By using a foil barrier
you will keep your home far warmer than without a radiant barrier.
A few things are important to look out for when buying a radiant barrier. If you’re
doing the installation yourself, you should select a tear resistant radiant barrier so your
installation will be easier. The best way to test the strength of the radiant barrier is to
take a small sample and try to tear it by hand. If it rips apart, chances are it will tear
easily and make your installation difficult.
The types that don’t tear easily usually have a woven mesh that is laminated
between two sheets of foil. Other types of radiant barrier use what is called, a "
bubble-pack" between the foil sheets, giving the radiant barrier some added strength.
Another thing to check would be the flammability rating. You should select a radiant
barrier that has a Class I USB (Uniform Building Code) or a Class A NFPA (National Fire
Protection Association) flammability rating. To make sure, you can always ask your local
fire department or building inspector to review your selection or recommend an appropriate
product.
Be aware that radiant barriers can also be used as vapor barriers, which prevent moisture
from passing through them. So depending on where you are using a radiant barrier will
determine what kind you use. You don’t want warm air passing through it onto a cold
surface and then condensing, this could cause problems.
For installation, place the radiant barrier, foil-face up under a sub-floor about 1 to 2
inches below the radiant tubing.
To receive the best efficiency and comfort from your radiant heating system some
basic rules should be followed; all of your exterior rim joists should be insulated; and
insulation should be stapled to the bottom of your joists under the radiant barrier.
Also, keep in mind that radiant in-floor heat will not work properly until the joist
space is closed.
While radiant barriers are certainly not new on the market, they are an inexpensive yet
effective way for homeowners to save energy and money. Radiant barrier materials are
continuing to improve and they are becoming widely available throughout North America.
With a radiant heat system, a radiant barrier will reflect the heat back into the home,
heating your home much more efficiently.
-- Resource Box --
This article may be distributed freely on your website, as long as
this entire article, including working links and this resource box are unchanged.
